Bluesky Jewel Paste Gel Instructions

  1. Prepare the nail as usual and apply a layer of gel base coat. Cure with an LED lamp for 60 seconds or a UV lamp for 2 minutes.
  2. Apply 1-2 layers of your desired colored gel polish to the nail and cure each layer for 60 seconds with an LED lamp or 2 minutes with a UV lamp.
  3. Take Jewel Paste Gel with a brush and apply it to the desired areas on the nail. Jewel Paste Gel is very thick, so it sometimes needs to be "dug out" of the palette with a brush. Cure for 60 seconds with an LED lamp or 2 minutes with a UV lamp.
  4. Apply a layer of gel top coat to the nail and cure for 60 seconds with an LED lamp or 2 minutes with a UV lamp.

    Notes:
  • Avoid keeping products in front of a UV/LED lamp, as the products will cure and spoil. The sun's UV rays also cure the products, so do not do nail art by a window or outdoors, even on cloudy days.
  • If bright streaks are visible in the polish, the product's pigment has separated from the polish, and the bottle must be shaken thoroughly.
  • After curing gel polishes, the surface remains tacky to allow the gel layers to adhere to each other. Thus, the polish has cured correctly despite the tacky surface. If impurities adhere to the tacky surface, they can be removed using cleanser wipes.