Bluesky Fast & Easy Builder Gel, Dusty Rose

Fast & Easy Builder, a builder gel in a bottle.

The shades Neutral Beauty, Latte, Dusty Rose, Pale, Rose, Honey and Clear are relatively thin.
The shades Frosty Pearl, Dusty Pink, Mauve Mist, Nude Delight and Peach Glitz are thicker.

The product combines the properties of a builder gel and a base coat. The product is used for short extensions and on top of natural nails to provide strength and support.

Fast & Easy Builder works as a base coat on its own, but it is often a good idea to use a separate base coat or primer with the product.

Fast & Easy Builder is a soft gel, which means it can also be removed by soaking in acetone.
The product does not always need to be removed, but can be filled, in which case only the old color is removed from the nail.

Fast & Easy Builder is suitable as a base for a gel tip system.

The product can be used as is without a separate color polish.

1. Push the cuticles away from the nail and clean the dry skin with cuticle clippers or scissors if necessary.

2. Shape the tip of the nail and lightly roughen the surface of the nail using a block or buffer file. Avoid over-filing the nail.

3. Clean the nail surface with Bluesky's ready-made cleaning pads or cleanser liquid and lint-free pads.

4. Mix the product before use and swirl the excess polish around the inside of the bottle. Apply a thin layer of gel to the nail, starting from the middle of the nail and pushing the brush towards the cuticle line. Press the brush lightly to spread the bristles towards the edge of the nail and pull the brush towards the free tip of the nail. This is called a glide layer, which helps the gel to spread evenly over the entire nail area. Do not harden the glide layer.

5. Take a larger amount of gel and swipe it into the center of the nail, after which you can move the mass lightly with a brush. You can also use a thin decorative applicator.
If you find it difficult to control the mass, you can apply several layers. Cure with a UV lamp for 2 minutes or an LED lamp for 60 seconds.

6. Wipe the gel surface with cleanser, file the nail into shape and smooth the surface. The filing can be finished using a buffer or block file, after which the nail surface is cleaned again.

7. If you wish, you can now add color and decorations to the nail. Then apply a layer of gel top coat using the same technique as the base coat. Cure UV 2min or LED 30-60s. No-wipe top coat does not need to be wiped off after curing.

9. Moisturize your skin with cuticle oil and you're done!

Notes:

• Avoid keeping products in front of a UV/LED lamp, as the products will harden and deteriorate. The sun's UV rays will also harden the products, so do not use the products in front of a window or outside, even on cloudy days.
• After the gel hardens, the surface remains sticky so that the gel layers stick to each other. This means that the polish has hardened properly despite the sticky surface. If impurities stick to the sticky surface, they can be removed using cleanser pads.
• If you have problems with the durability of your polishes or gels, you may need separate primers or a different type of base coat. For help with durability issues, you can contact us by email or by visiting our store.