Moyra Stamping & Painting Gel, Silver 19

Moyra's new 2-in-1 product, combining stamping gel polish and gel paint!
A highly pigmented formula that covers in one coat and is perfect for creating even the smallest details!

Cure with UV lamp for 2 minutes or LED lamp for 60 seconds.

Moyra Stamping & Painting Gel works very differently from other stamping products. The product requires some practice and patience, and for this reason, we do not recommend it for beginners. For beginners, we recommend Moyra's regular stamping polishes or Bluesky gel stamping polishes.

For stamping:

1. Apply your chosen base color to the nail and cure with a UV lamp for 2 minutes or an LED lamp for 60 seconds.
2. Squeeze a small amount of Stamping & Painting gel onto the edge of your chosen stamping pattern.
3. Using a scraper, spread the polish over the entire pattern at a 45-degree angle.
4. Pick up the pattern with the stamper by rolling the stamper over the pattern very slowly and gently. Do not press the stamper too hard onto the stamping plate. It is enough for the stamper to just touch the plate. This may require several attempts before the pattern transfers completely to the stamper.
   If the stamper is just pressed onto the pattern or rolled too quickly, the pattern will not transfer to the stamper.
5. Stamp the pattern onto the nail with a similar motion.
6. Cure with a UV lamp for 2 minutes or an LED lamp for 60 seconds.
7. Apply a layer of gel top coat to the nail and cure with a UV lamp for 2 minutes or an LED lamp for 60 seconds.
   If the pattern is not successful, do not cure the nail. You can wipe it off the nail with a lint-free wipe and Cleanser.

As a gel paint:

1. Apply your chosen base color to the nail and cure with a UV lamp for 2 minutes or an LED lamp for 60 seconds.
2. Remove the sticky layer from the gel polish with lint-free wipes and Cleanser.
3. Squeeze a small amount of Stamping & Painting gel onto a palette.
4. Paint the desired pattern on the nail. Once satisfied, cure with a UV lamp for 2 minutes or an LED lamp for 60 seconds.
5. Apply a layer of gel top coat to the nail and cure with a UV lamp for 2 minutes or an LED lamp for 60 seconds.
   
   Notes:

• Avoid placing the products in front of a UV/LED lamp, as they will cure and spoil. The sun's UV rays also cure the products, so do not do nail polish near a window or outdoors, even on cloudy days.
• If bright streaks appear in the polish, the pigment has separated from the polish and the bottle must be thoroughly mixed.
• After curing gel polishes, the surface remains tacky, so that the gel layers adhere to each other. Therefore, the polish has cured correctly despite the tacky surface. If impurities adhere to the tacky surface, they can be removed using cleanser wipes.