Moyra Full Cover Nail Tips, Square 500 pcs

Moyra full nail tips are an easy and quick way to get extensions.

12 sizes, 500 pcs

1. Make sure you are not in direct sunlight. The products are UV-cured, so sunlight can cure the products in their bottles.
2. Pre-measure the correct size tips. The tip should extend from one side of the nail to the other. If you are between two sizes, choose the larger size. Set the tips aside.
3. Push back cuticles with a cuticle pusher.*
4. Shape and, if necessary, shorten the natural nail tip with the BS2 shaping file (White).
5. Buff the nail surface with a BS4 buffer file (Black). Do not over-file, as this can thin the nail. The purpose is only to remove shine from the natural nail. Pay special attention to the cuticle area and the sides of the nail.
6. Clean the nail surface with Cleanser Wipes.
7. Apply a thin layer of PH Bond to the nail. This dries the surface layers of the nail so that the gel adheres better. Allow the product to dry slightly before the next step.
8. Apply a thin, even layer of Acid Free Primer to the nail. Avoid skin contact. Allow to dry for 1 min. The primer surface will remain slightly shiny. Do not touch the nail.
9. Apply a thin, even layer of Strong Adhesive gel glue to the nail. Cure with a UV lamp for 2 min or an LED lamp for 60 s.
   
10. Apply Strong Adhesive gel glue to the inside of the tip. Press the tip onto the nail, starting from the cuticle line. Make sure no air bubbles form under the tip.
11. Hold the tip in place and cure for 15 s so that the tip adheres to the nail. Now you can release the tip and cure it properly for 60 s.
12. Repeat for each nail.
13. Use a BS4 Buffer file and buff the tip surface. Removing the shine provides a better adhesion surface for the gel polish.
14. Clean the nail surface with Cleanser Wipes. Now your nails are ready for decorations!
15. After decorations, apply a layer of No Wipe Top Coat to the nails and cure for 60 s.
16. Finish your manicure by applying cuticle oil to the cuticles to restore moisture.

* NOT included in the set. To be purchased separately.

Removal:

1. Cut the tip short with either tip cutters or nail clippers.
2. Break the surface of the tip/gel polish by filing. Use the 100/180 grit shaping file included in the set for this.
3. Pour acetone onto a cotton pad and cover the nail. Cover the cotton pad with either foil or removal clips to keep the cotton pads in place and prevent the acetone from evaporating.
4. Allow the acetone to act for approximately 15-20 min.
5. Scrape the melted gel from the nails with an orange wood stick or a cuticle pusher. Be careful not to scratch your own nail.
6. If gel remains on the nail, you can gently file it off using a BS4 Buffer file.
7. Apply cuticle oil to the cuticles to restore moisture to the nails and skin.

Notes:

• Avoid placing products in front of a UV/LED lamp, as the products will cure and be ruined. The sun's UV rays also cure the products, so do not apply polish near a window or outdoors, even on cloudy days.
• If clear streaks are visible in the polish, the product's pigment has separated from the polish and the bottle must be thoroughly mixed.
• After curing gel polishes, the surface remains tacky so that the gel layers adhere to each other. The polish has therefore cured correctly despite the tacky surface. If impurities adhere to the tacky surface, they can be removed using cleanser wipes.